APC®
rack-mountable smart UPS with a power rating of 5000 VA includes
maintenance-free sealed lead-acid battery with suspended electrolyte.
UPS has 3U rack mountable form factor and is surge energy rated at 480
J.
- Size: 130 mm(H) x 432 mm(W) x 660 mm(D), cord: 10′(L)
- Black
- Connections: 2 x NEMA L6-20R, 2 x NEMA L6-30R o/p, NEMA L6-30P i/p
- Power capacity: 4200 W /5000 VA
- Input
voltage: 208 V nominal 50/60 Hz +/- 5 Hz (auto sensing) 160 – 280 V
mains operation, 100 – 80 V adjustable mains operation, maximum line
current per phase: 20A, maximum input current per phase: 20A, 2 power
cords
- Output voltage: 208 V 50/60 Hz +/- 3 Hz user adjustable
+/- 0.1, efficiency at full load: 92.0%, O/p voltage distortion: less
than 3%
- Battery information: Battery type: maintenance-free
sealed Lead-Acid battery with suspended electrolyte, runtime: 0.09 hour
4.20 kW full load, 0.26 hour 2.10 kW half load, recharge time: 2.50 hour
- Operating
conditions: 0 – 40 deg C temp, 0 – 95% relative humidity, 0-3000 m
elevation, storage conditions: -15 – 45 deg C temp, 0 – 95% relative
humidity, 0-15000 m elevation
- Form factor: 3U tower/rack mountable
- Waveform
type: sine wave, crest factor: 3: 1, bypass: internal bypass (automatic
and manual), interface port(s): DB-9 RS-232, RJ-45 10/100 Base-T,
Smart-Slot
- Audible noise at 1 meter from surface of unit: 55 dba, online thermal dissipation: 1324.00 BTU/hr
- Scalable
runtime, intelligent battery management, hot-swappable batteries,
network manageable, rack/tower convertible, automatic self-test,
- Cold-start
capable, audible alarms, resettable circuit breaker, full time
multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping
response time, surge energy rating: 480J
- Complaint and standards: CSA, FCC Part 15 Class A, OSHPD, UL 1778, RoHS, PEP, EOLI
- Package contents: CD with software, rack mounting support rails, smart UPS signalling RS-232 cable, user manual
- Weight: 54.55 kg
- Warranty: 2 years repair or replace
This
APC rack tower/rack-mountable smart uninterruptible power supply (UPS)
is a necessity for a variety of industries susceptible to serious damage
from data loss or unexpected downtime due to power failures. It offers a
power capacity of 5,000 VA, so it will keep your servers running even
if your power source goes out. If you’re using the entire 4.20 kW full
load, you can expect about 5.4 minutes of power, while using the 2.10 kW
half load of power will give you approximately 15.6 minutes of backup
power.